3 and 4 Point Flexure Fixture Options
A range of different anvils and roller sizes are available to suit different testing requirements. Four-point conversion kits are available for most standard three-point fixtures
|
3 to 4 Point Conversion Kit for 2810-181,182
|
2810-184
|
|
Upper Roller, 25 mm for 2810-181,182,183,184
|
2810-185
|
|
Upper Roller, 10 mm for 2810-181,182,183,184
|
2810-186
|
|
Upper Roller, 5 mm for 2810-181,182,183,184
|
2810-187
|
|
Lower Roller and Support Set, 25 mm for 2810-181,182,183
|
2810-188
|
|
Lower Roller and Support Set, 10 mm for 2810-181,182,183
|
2810-189
|
|
Lower Roller and Support Set, 5 mm for 2810-181,182,183
|
2810-190
|
|
3 to 4 Point Conversion Kit for 2810-206
|
2810-201
|
|
Upper Roller Anvil, 50 mm for 2810-206
|
2810-202
|
|
Upper Roller Anvil, 25 mm for 2810-206
|
2810-203
|
|
Lower Roller Anvil, 25 mm for 2810-206
|
2810-204
|
|
Upper Roller Anvil, 25 mm for 2810-206
|
2810-205
|
|
Anvil Set, 4 mm for 2810-400,405
|
2810-401
|
|
Anvil Set, 10 mm for 2810-400,405
|
2810-402
|
|
Deflectometer Plunger for 2810-400.
|
2810-403
|
|
3 to 4 Point for Conversion Kit 2810-405
|
2810-405
|
|
3 to 4 Point Conversion Kit 2810-505
|
2810-505
|
|
Center Pivot Supports for Flexural Testing of Brittle Material Specimens
|
W-6814-A1
|
|
Center Pivot Supports for Flexural Testing of Brittle Material Specimens up to 300 mm (12 in) width
|
W-6814-A2
|
|
Universal Pivot Supports for Flexural Testing of Brittle Material Specimens
|
W-6814-A3
|
|
Universal Pivot Supports for Flexural Testing of Brittle Material Specimens up to 300 mm (12 in) width
|
W-6814-A4
|
